Non-Covalently Pre-Assembled High-Performance Near-Infrared Fluorescent Molecular Probes for Cancer Imaging.

New fluorescent molecular probes, which can selectively target specific cell surface receptors, are needed for microscopy, in vivo imaging, and image guided surgery. The preparation of multivalent probes using standard synthetic chemistry can be a laborious process due to low reaction yields caused by steric effects. In this study, fluorescent molecular probes were prepared by a programmed non-covalent pre-assembly process that used a near-infrared fluorescent squaraine dye to thread a macrocycle bearing a cyclic arginine-glycine-aspartate peptide antagonist (cRGDfK) as a cancer targeting unit. Cell microscopy studies using OVCAR-4 (ovarian cancer) and A549 (lung cancer) cells that express high levels of the integrin αvß3 or αvß5 receptors, respectively, revealed a multivalent cell targeting effect. That is, there was comparatively more cell uptake of a pre-assembled probe equipped with two copies of the cRGDfK antagonist than a pre-assembled probe with only one appended cRGDfK antagonist. The remarkably high photostability and low phototoxicity of these near-infrared probes allowed for acquisition of long-term fluorescence movies showing endosome trafficking in living cells. In vivo near-infrared fluorescence imaging experiments compared the biodistribution of a targeted and untargeted probe in a xenograft mouse tumor model. The average tumor-to-muscle ratio for the pre-assembled targeted probe was 3.6 which matches the tumor targeting performance reported for analogous cRGDfK-based probes that were prepared entirely by covalent synthesis. The capability to excite these pre-assembled near-infrared fluorescent probes with blue or deep-red excitation light makes it possible to determine if a target site is located superficially or buried in tissue, a probe performance feature that is likely to be very helpful for eventual applications such as fluorescence guided surgery.

High expression of integrin αvß3 enables uptake of targeted fluorescent probes into ovarian cancer cells and tumors.

The cell line OVCAR-4 was recently ranked as one of the most representative cell lines for high grade serous ovarian cancer (HGSOC). However, little work has been done to assess the susceptibility of OVCAR-4 cells and tumors to the more common types of molecular targeting. Proteome profiles suggest OVCAR-4 express high levels of integrin αvß3 receptors. Using flow cytometry with fluorescent antibodies we determined that OVCAR-4 cells have high number of integrin αvß3 receptors ([9.8 ±â€¯2.5] × 104/cell) compared to the well-characterized cell line U87-MG ([5.2 ±â€¯1.4] × 104/cell). However, OVCAR-4 cells also have roughly three times the surface area of U87-MG cells, so the average αvß3 receptor density is actually lower (11 ±â€¯3 versus 18 ±â€¯6 receptors/µm2). A series of new fluorescent molecular probes was prepared with structures comprised of a deep-red squaraine fluorophore (∼680 nm emission) covalently attached to zero, one, or two cyclic pentapeptide cRGD sequences for integrin targeting. Microscopy studies showed that uptake of the divalent probe into cultured OVCAR-4 cells was 2.2 ±â€¯0.4 higher than the monovalent probe, which in turn was 2.2 ±â€¯0.4 higher than the untargeted probe. This probe targeting trend was also seen in OVCAR-4 mouse tumor models. The results suggest that clinically relevant OVCAR-4 cells can be targeted using molecular probes based on αvß3 integrin receptor antagonists such as the cRGD peptide. Furthermore, deep-red fluorescent cRGD-squaraine probes have potential as targeted stains of cancerous tissue associated with HGSOC in surgery and pathology settings.

Time-lapse imaging of cell death in cell culture and whole living organisms using turn-on deep-red fluorescent probes.

Cell death is a central process in developmental biology and also an important indicator of disease status and treatment efficacy. Two related fluorescent probes are described that are molecular conjugates of one or two zinc dipicolylamine (ZnDPA) coordination complexes with an appended solvatochromic benzothiazolium squaraine dye. The probes were designed to target the anionic phospholipid, phosphatidylserine (PS), that is exposed on the surface of dead and dying cells. A series of spectrometric and microscopy studies using liposomes and red blood cell ghosts as models showed that the probe with two ZnDPA targeting units produced higher affinity, stronger fluorescence "turn-on" effect, and better image contrast than the probe with one ZnDPA. Both fluorescent probes enabled "no-wash" time-lapse microscopic imaging of mammalian cell death within a culture. The probe with two ZnDPA units was used for non-invasive time-lapse imaging of cell death during the development of Xenopus laevis (frog) embryos. In vivo fluorescence micrographs revealed probe accumulation within the embryo tail, head and spine regions that were undergoing regression and apoptosis during growth and maturation. These new fluorescent probes are likely to be useful for time-resolved, non-invasive in vivo imaging of cell death process in range of living organisms. From a broader perspective, it should be possible to utilize the negative solvatochromism exhibited by benzothiazolium squaraine dyes for development of various "turn-on" deep-red fluorescent probes and materials that target cell surface biomarkers for in vitro and in vivo imaging.

Selective photothermal inactivation of cells labeled with near-infrared croconaine dye.

Photothermal inactivation of cells caused by laser heating of a near-infrared croconaine dye is more effective when the dye is located inside the cell. The cell inactivation is spatially confined - laser irradiation of a mixed population of two different cell lines produces selective inactivation of the cells labeled with croconaine dye and does not harm adjacent unlabeled cells.

Preassembled Fluorescent Multivalent Probes for the Imaging of Anionic Membranes.

A new self-assembly process known as Synthavidin (synthetic avidin) technology was used to prepare targeted probes for near-infrared fluorescence imaging of anionic membranes and cell surfaces, a hallmark of many different types of disease. The probes were preassembled by threading a tetralactam macrocycle with six appended zinc-dipicolylamine (ZnDPA) targeting units onto a linear scaffold with one or two squaraine docking stations to produce hexavalent or dodecavalent fluorescent probes. A series of liposome titration experiments showed that multivalency promoted stronger membrane binding by the dodecavalent probe. In addition, the dodecavalent probe exhibited turn-on fluorescence due to probe unfolding during fluorescence microscopy at the membrane surface. However, the dodecavalent probe also had a higher tendency to self-aggregate after membrane binding, leading to probe self-quenching under certain conditions. This self-quenching effect was apparent during fluorescence microscopy experiments that recorded low fluorescence intensity from anionic dead and dying mammalian cells that were saturated with the dodecavalent probe. Conversely, probe self-quenching was not a factor with anionic microbial surfaces, where there was intense fluorescence staining by the dodecavalent probe. A successful set of rat tumor imaging experiments confirmed that the preassembled probes have sufficient mechanical stability for effective in vivo imaging. The results demonstrate the feasibility of this general class of preassembled fluorescent probes for multivalent targeting, but fluorescence imaging performance depends on the specific physical attributes of the biomarker target, such as the spatial distance between different copies of the biomarker and the propensity of the probe-biomarker complex to self-aggregate.

Pre-Assembly of Near-Infrared Fluorescent Multivalent Molecular Probes for Biological Imaging.

A programmable pre-assembly method is described and shown to produce near-infrared fluorescent molecular probes with tunable multivalent binding properties. The modular assembly process threads one or two copies of a tetralactam macrocycle onto a fluorescent PEGylated squaraine scaffold containing a complementary number of docking stations. Appended to the macrocycle periphery are multiple copies of a ligand that is known to target a biomarker. The structure and high purity of each threaded complex was determined by independent spectrometric methods and also by gel electrophoresis. Especially helpful were diagnostic red-shift and energy transfer features in the absorption and fluorescence spectra. The threaded complexes were found to be effective multivalent molecular probes for fluorescence microscopy and in vivo fluorescence imaging of living subjects. Two multivalent probes were prepared and tested for targeting of bone in mice. A pre-assembled probe with 12 bone-targeting iminodiacetate ligands produced more bone accumulation than an analogous pre-assembled probe with six iminodiacetate ligands. Notably, there was no loss in probe fluorescence at the bone target site after 24 h in the living animal, indicating that the pre-assembled fluorescent probe maintained very high mechanical and chemical stability on the skeletal surface. The study shows how this versatile pre-assembly method can be used in a parallel combinatorial manner to produce libraries of near-infrared fluorescent multivalent molecular probes for different types of imaging and diagnostic applications, with incremental structural changes in the number of targeting groups, linker lengths, linker flexibility, and degree of PEGylation.

Clean Photothermal Heating and Controlled Release from Near-Infrared Dye Doped Nanoparticles without Oxygen Photosensitization.

The photothermal heating and release properties of biocompatible organic nanoparticles, doped with a near-infrared croconaine (Croc) dye, were compared with analogous nanoparticles doped with the common near-infrared dyes ICG and IR780. Separate formulations of lipid-polymer hybrid nanoparticles and liposomes, each containing Croc dye, absorbed strongly at 808 nm and generated clean laser-induced heating (no production of (1)O2 and no photobleaching of the dye). In contrast, laser-induced heating of nanoparticles containing ICG or IR780 produced reactive (1)O2, leading to bleaching of the dye and also decomposition of coencapsulated payload such as the drug doxorubicin. Croc dye was especially useful as a photothermal agent for laser-controlled release of chemically sensitive payload from nanoparticles. Solution state experiments demonstrated repetitive fractional release of water-soluble fluorescent dye from the interior of thermosensitive liposomes. Additional experiments used a focused laser beam to control leakage from immobilized liposomes with very high spatial and temporal precision. The results indicate that fractional photothermal leakage from nanoparticles doped with Croc dye is a promising method for a range of controlled release applications.